Save Seq[n] Reg[nn]
Supported
This softkey enables you to save the current instrument state in the specified register
within the specified sequence. The instrument state includes all of your setup selections
except list sweep data and functions that do not change by the preset function or by a
power cycle.
Preset
Range
Location
Remarks
Save User Preset
Supported
This softkey enables you to establish your user-defined preset state. Set up all of the
instrument state conditions that you want for your unique preset state. When you have
defined the instrument state to suit your needs, press
user-defined preset state is allowed, so when you save the instrument state you will save
over any previously saved state. Your instrument state will be recalled by the signal
generator any time you press
User.
Preset
Range
Location
Remarks
Chapter 5
All
N/A
N/A
Page 244
Do not press this key until you have specified the correct sequence and
register using the
Select Seq
All
as long as you have set the
Preset
N/A
N/A
Page 247
The instrument state definition is a state file and is not affected by a
preset or by a power cycle.
and
softkey.
Select Reg
Save User Preset
Preset Normal User
Key Reference
S
. Only one
key to
207