Ampl Start
Supported
This softkey enables you to set the amplitude of the first point in the sweep. When you
press
Ampl Start
sweep.
Preset
Range
Location
Remarks
Ampl Stop
Supported
This softkey enables you to set the amplitude of the last point in the sweep. When you
press
Ampl Stop
sweep.
Preset
Range
Location
Remarks
Chapter 5
All
, amplitude becomes the active function for the first point in the step
−135.00 dBm (for instruments with Option 1E1)
You can set the value anywhere in the range of the signal generator's
specified output power.
Page 245
None
All
, amplitude becomes the active function for the last point in the step
−135.00 dBm (for instruments with Option 1E1)
You can set the value anywhere in the range of the signal generator's
specified output power.
Page 245
None
Key Reference
A
117