Key Reference
F
FM Tone 1 Rate
Supported
This softkey enables you to set the internal modulation frequency for the FM tone 1 rate
of the dual-sine FM waveform.
Preset
Range
Location
Remarks
FM Tone 2 Ampl Percent Of Peak
Supported
This softkey enables you to adjust the amplitude of the alternate frequency as a
percentage of the peak analog modulation amplitude. For example, if the tone 2
amplitude is set to 30.0% of the total amplitude, then the primary frequency is 70.0% of
the total amplitude.
Default
Range
Location
Remarks
FM Tone 2 Rate
Supported
This softkey enables you to set the internal modulation frequency for the FM tone 2 of
the dual-sine FM waveform.
Default
Range
Location
Remarks
150
PSG-A Series
400.0 Hz
0.5 Hz−1.0 MHz (minimum increment is 0.5 Hz)
Page 236
This key is coupled to the
the
softkey in the FM swept-sine menu. Any value set for
FM Start Rate
is reflected in the
FM Tone 1 Rate
PSG-A Series
50.0%
0.1%−99.9%
Page 236
This is applicable only for the dual-sine function.
PSG-A Series
400.0 Hz
0.5 Hz−1.0 MHz (minimum increment is 0.5 Hz)
Page 236
This key is coupled to the
menu. Any value set for
softkey.
softkey in the initial FM menu and
FM Rate
and
FM Rate
softkey in the FM swept-sine
FM Stop Rate
is reflected in the
FM Tone 2 Rate
softkeys.
FM Start Rate
FM Stop Rate
Chapter 5