Key Reference
S
Screen Saver Delay:
Supported
This softkey enables you to set the period of time before the screen saver is activated
when there has been no input from the front panel.
Preset
Range
Location
Remarks
Screen Saver Mode
Supported
This softkey toggles the operating mode for the screen saver between Light Only and
Light & Text. When you set the screen saver to Light Only, only the display light is
turned on and off. When you set the screen saver to Light & Text, the display light and
the text are turned on and off.
Preset
Choices
Location
Remarks
208
All
N/A
1−12 hours
Page 247
The screen saver delay state is not affected by a preset or by a power
cycle.
All
N/A
Light Only or Light & Text
Page 247
The screen saver mode is not affected by a preset or by a power cycle.
To prevent the text from burning the display, if you are leaving the
display unchanged for long periods of time, set the mode to light and
text.
Chapter 5