Restore Factory Defaults; Return; Rf On/Off - Agilent Technologies E8241A User Manual

Key Reference
R

Restore Factory Defaults

Supported
This softkey re-sets the bandwidth of the reference oscillator to the factory-defined
default state. The default value for the internal reference bandwidth is 125 Hz. The
default value for the external reference bandwidth is 25 Hz
Preset
Range
Location
Remarks

Return

Supported
Use this hardkey to move from your current softkey menu to the menu that precedes it
or to cancel an active function entry. When you are at the preset state, the
hardkey has no function.
Preset
Range
Remarks

RF On/Off

Supported
This hardkey toggles the operating state of the RF signal at the RF OUTPUT connector.
Although you can configure and engage various modulations, no signal is available at
the RF OUTPUT connector until
on in the display to indicate whether RF is turned on or off.
Preset
Range
Remarks
202
PSG-A Series with Option UNJ
N/A
N/A
Page 248
None.
All
N/A
N/A
The return key has autorepeat capability. Hold it down and you are
moved repeatedly back through the menus until you either release the
key or you reach the preset state.
All
RF On/Off
Off
On or Off
None
is set to On. An annunciator is always turned
Return
Chapter 5