Int Triggered; Internal - Agilent Technologies E8241A User Manual

Int Triggered

Supported
Use this softkey to select an internal, triggered, pulse modulation. When internal
triggered pulse is enabled, an RF pulse will occur at the RF OUTPUT connector
whenever a valid trigger signal occurs at the TRIGGER IN connector. The RF pulse will
have pulse width and delay as set by way of the front panel or with programming
commands. Refer to
Figure 5-5
Preset
Range
Location
Remarks

Internal

Supported
This softkey enables you select an internal mode for the automatic leveling control.
Preset
Range
Location
Remarks
Chapter 5
PSG-A Series
Figure 5-5.
N/A
N/A
Page 242
None
All
N/A
N/A
Page 232
None
Key Reference
I
167