Key Reference
L
LF Out Tone 2 Freq
Supported
This softkey enables you to change the alternate frequency of the internally generated
modulation source. The alternate frequency is the second frequency in dual-sine or the
stop frequency in swept-sine.This key is coupled to the
LF Out menu and the
Preset
Range
Location
Remarks
LF Out Waveform
Supported
Use this softkey to access a menu of choices that enables you to select the LF output
waveform for your LF function generator.
Preset
Choices
Location
Remarks
178
PSG-A Series
LF Out Stop Freq
400.0 Hz
0.5 Hz−1.0 MHz (minimum increment allowed is 0.5 Hz)
Page 240
This softkey is active only when you have selected the internal source
to operate as Function Generator 1.
PSG-A Series
Sine
Sine
Noise
Dual-Sine
Ramp
Page 240
This key is active only when you have selected the internal
source to operate as a function generator. Dual-Sine and
Swept-Sine are available only when you have selected the
internal source to operate as Function Generator 1.
LF Out Freq
softkey in the LF Out Swept-Sine menu.
Triangle
Swept-Sine
softkey in the initial
Square
DC
Chapter 5