Meter Address; Meter Channel A B; Meter Timeout - Agilent Technologies E8241A User Manual

Meter Address

Supported
This softkey enables you to select the external power meter GPIB address for use during
the user flatness calibration.
Preset
Range
Location
Remarks

Meter Channel A B

Supported
This softkey toggles between channels A and B when you are using an external power
meter that has two channels.
Preset
Choices
Location
Remarks

Meter Timeout

Supported
This softkey enables you to select the remote timeout length of the external power meter
during user flatness calibration.
Preset
Range
Location
Remarks
Chapter 5
All
N/A
0−30
Page 232
The meter address is not affected by a preset or by a power cycle.
The power meter is controlled only through a GPIB cable.
All
N/A
A or B
Page 232
The meter channel selection is not affected by a preset or by a power
cycle.
The power meter is controlled only through a GPIB cable.
All
N/A
1.0 msec−100.0 sec
Page 232
The meter timeout setting is not affected by a preset or by a power
cycle. The power meter is controlled only through a GPIB cable.
Key Reference
M
183