Store Ref Osc Setting; Sweep; Sweep Direction Down Up - Agilent Technologies E8241A User Manual

Key Reference
S

Store Ref Osc Setting

Supported
This softkey enables you to store the current coarse and fine reference oscillator
adjustment settings. Refer to the calibration guide for more information.
Preset
Range
Location
Remarks

Sweep

Supported
Use this softkey to access a menu of choices that enables you to configure the sweep
parameters. In this menu you can choose to sweep frequency only, amplitude only, or
both frequency and amplitude. You can also choose to turn off all sweep functions.
Preset
Choices
Location
Remarks

Sweep Direction Down Up

Supported
This softkey enables you to change the direction of the sweep. Choose Up to sweep from
the first point in the list sweep to the last point, or from the step sweep start frequency
and amplitude to the stop frequency and amplitude. Choose Down to reverse the
direction of the sweep.
Preset
Choices
Location
Remarks
216
All
N/A
N/A
Page 248
This adjustment is intended for use by service personnel.
All
Off
Off Freq
Page 245
None
All
Up
Down or Up
Page 245
None
Ampl Freq & Ampl
Chapter 5