Recall Ref Osc Setting; Recall Reg; Ref Osc Coarse - Agilent Technologies E8241A User Manual

Recall Ref Osc Setting

Supported
Use this softkey to recall the last saved reference oscillator coarse and fine adjustment
setting.
Preset
Range
Location
Remarks

Recall Reg

Supported
Use this softkey to recall an instrument state from a saved register. Recalling a register
also selects that register number for all keys which specify a register number in this
menu. You can also use the front panel knob and the up and down arrow keys to scroll
through all saved registers for the selected sequence.
Preset
Range
Location
Remarks

Ref Osc Coarse

Supported
This softkey is provided for adjusting the internal reference oscillator. Refer to the
calibration guide for more information.
Preset
Range
Location
Remarks
Chapter 5
All
N/A
N/A
Page 248
This adjustment is intended for use by service personnel. Refer to the
calibration guide for more information.
All
N/A
N/A
Page 243
None
All
N/A
N/A
Page 248
This adjustment is intended for use by service personnel.
Key Reference
R
199