Page Down; I Input (Vector Models Only); Q Input (Vector Models Only); Knob - Agilent Technologies X Series User Manual

Signal Generator Overview
Front Panel Overview
NOTE
The Mod On/Off hardkey and LED functionality are only valid for instruments with Option
UNT installed.

15. Page Down

In a table editor, use this hardkey to display the next page. See
page 46. When text does not fit on one page in the display area, use this key in conjunction with the
Page Up key (page 6) to scroll text.

16. I Input (vector models only)

Type: female BNC Impedance: 50 Ω
Connector
Signal An externally supplied analog, in–phase component of I/Q modulation.
The signal level is
Damage Levels 1 V
rms
See also, "I/Q Modulation" on page

17. Q Input (vector models only)

Type: female BNC Impedance: 50 Ω
Connector
Signal An externally supplied analog, quadrature–phase component of I/Q modulation.
The signal level is
Damage Levels 1 V
rms
See also, "I/Q Modulation" on page

18. Knob

Rotating the knob increases or decreases a numeric value, or moves the highlight to the next digit,
character, or item in a list. See also,

19. Incr Set

This hardkey enables you to set the increment value of the currently active function. The increment
value also affects how much each turn of the knob changes an active function's value, according to
the knob's current ratio setting (see

20. Return

This hardkey enables you to retrace key presses. In a menu with more than one level, the Return key
returns to the prior menu page.

21. More and LED

When a menu contains more softkey labels than can be displayed, the More LED lights and a More
8
= 0.5 V for a calibrated output level.
rms
204.
= 0.5 V for a calibrated output level.
rms
204.
"Front Panel Knob Resolution" on page
"Front Panel Knob Resolution" on page
"Example: Using a Table Editor" on
30.
30).
Agilent X-Series Signal Generators User's Guide