LF Out Start Freq
Supported
This softkey enables you to change the starting frequency for swept-sine low frequency
output. This key is coupled to the
LF Out Tone 1 Freq
is reflected in the
Out Start Freq
you change the value for either the
the value for
LF Out Start Freq
Preset
Range
Location
Remarks
LF Out Stop Freq
Supported
This softkey enables you to change the ending frequency for swept-sine low frequency
output.
This key is coupled to the
value set for
LF Out Stop Freq
Preset
Range
Location
Remarks
Chapter 5
PSG-A Series
LF Out Freq
softkey in the LF Out dual-sine menu. Any value set for
LF Out Freq
LF Out Freq
is changed to match.
400.0 Hz
1.0 Hz−1.0 MHz (minimum increment is 1.0 Hz)
Page 240
This softkey is active only when you have selected the internal source
to operate as Function Generator 1.
PSG-A Series
LF Out Tone 2 Freq
is reflected in the
400.0 Hz
1.0 Hz−1.0 MHz (minimum increment is 1.0 Hz)
Page 240
This softkey is active only when you have selected the internal source
to operate as Function Generator 1.
softkey in the initial LF Out menu and the
and
LF Out Tone 1 Freq
softkey or the
LF Out Tone 1 Freq
softkey in the LF Out Dual-Sine menu. Any
LF Out Tone 2 Freq
Key Reference
LF
softkeys. Conversely, if
softkey,
softkey.
175
L