Ext Detector; Ext Detector Coupling Factor; Ext Impedance 50 Ohm 600 Ohm - Agilent Technologies E8241A User Manual

Key Reference
E

Ext Detector

Supported
This softkey enables you to select an external diode detector leveling mode. This enables
you to connect a detector and a coupler or splitter to the RF output and level the RF
signal at a point external to the RF output connector.
Preset
Range
Location
Remarks

Ext Detector Coupling Factor

Supported
This softkey enables you to set the external detector coupling factor.
Preset
Range
Location
Remarks

Ext Impedance 50 Ohm 600 Ohm

Supported
This softkey toggles the external input impedance between 50 ohms and 600 ohms.
Preset
Choices
Location
Remarks
140
All
N/A
N/A
Page 232
None
All
16.0 dB
−200.0 dB to 200.0 dB
Page 232
N/A
All
50 Ohm
50 Ohm or 600 Ohm
Page 230, Page 235,
None
Page 237
Chapter 5