Φm Tone 2 Ampl Percent Of Peak; Φm Tone 2 Rate - Agilent Technologies E8241A User Manual

Key Reference
Symbols
ΦM Tone 2 Ampl Percent Of Peak
Supported
This softkey enables you to adjust the amplitude of the alternate frequency as a
percentage of the peak LF analog modulation amplitude. For example, if the tone 2
amplitude is set to 30.0% of the total amplitude, then the primary frequency is 70.0% of
the total amplitude.
Default
Range
Location
Remarks
ΦM Tone 2 Rate
Supported
This softkey enables you to set the internal modulation frequency for the phase
modulation tone 2 rate of the dual-sine waveform.
Default
Range
Location
Remarks
98
PSG-A Series
50.0%
0.1%−99.9%
Page 238
This is applicable for the dual-sine function only.
PSG-A Series
400.0 Hz
0.5 Hz−1.0 MHz (minimum increment is 0.5 Hz)
Page 238
This key is coupled to the
menu. Any value set for
softkey.
softkey in the ΦM swept-sine
ΦM Stop Rate
ΦM Tone 2 Rate
is reflected in the
ΦM Stop Rate
Chapter 5