Key Reference
A
ALC Off On
Supported
This softkey toggles the operating state of the automatic leveling control (ALC) circuit.
The RF output power of the signal generator is constantly monitored and controlled by
the ALC circuit. Its purpose is to hold output power at the desired level in spite of drift
due to temperature and time.
Preset
Range
Location
Remarks
All
Supported
This softkey enables you to specify that all file types in the user file system be listed.
Preset
Range
Location
Remarks
AM
Supported
Use this hardkey to access a menu of choices that enables you to configure the amplitude
modulation type, path, depth and depth coupling, rate, source, mode, and waveform.
Preset
Range
Location
Remarks
108
All
On
Off or On
Page 232
An alternative to setting the ALC off is to set the ALC to a narrow
bandwidth. ALC off is used for pulse widths less than 1.0 usec.
All
N/A
N/A
Page 249
None
PSG-A Series
N/A
N/A
Page 230
None
Chapter 5