Pulse Delay; Pulse Off On - Agilent Technologies E8241A User Manual

Pulse Delay

Supported
This softkey enables you to change the pulse delay of the internally generated pulse
modulation source.
Preset
Range
Location
Remarks

Pulse Off On

Supported
This softkey toggles the operating state for the currently selected pulse source.
When pulse modulation is on, the PULSE annunciator is shown in the display
Preset
Choices
Location
Remarks
Chapter 5
PSG-A Series
0.0 sec
The range is dependent upon the value set for the pulse period.
Internal Free Run: −(pulse period − 20 nS) to (pulse period − 20 nS)
Internal Triggered & Doublet: 70nS to (pulse period − 20 nS)
Page 242
None
PSG-A Series
Off
Off or On
Page 242
The RF carrier is modulated by the enabled modulation only when you
have also set
Mod On/Off
to On.
Key Reference
P
195