Key Reference
R
RS-232 Timeout
Supported
This softkey enables you to change the value for the RS-232 serial port timeout. If
further input is not received within the assigned timeout period while a SCPI command
is being processed, then the command is aborted and the input buffer is cleared.
Preset
Range
Location
Remarks
Run Complete Self Test
Supported
Use this softkey to run an automated, internal diagnostic test that checks for detectable
hardware failures. If there are probable hardware failures in the signal generator, refer
to the troubleshooting section of the service guide.
Preset
Range
Location
Remarks
Run Highlighted Tests
Supported
This softkey is provided for self test diagnostics. Refer to the troubleshooting section of
the service guide.
Preset
Range
Location
Remarks
204
All
N/A
N/A
Page 248
Once set, timeout is not affected by a preset or by a power cycle.
All
N/A
N/A
Page 250
This key is included for use by service personnel.
All
N/A
N/A
Page 250
This key is included for use by service personnel.
Chapter 5