Key Reference
A
AM Tone 2 Rate
Supported
This softkey enables you to set the internally generated modulation frequency for the
amplitude modulation tone 2 of the dual-sine AM waveform.
Preset
Range
Location
Remarks
AM Type Lin Exp
Supported
This softkey enables you to set the amplitude modulation type to linear (percent/volt) or
exponential (dB/volt).
Preset
Choices
Location
Remarks
AM Waveform
Supported
Use this softkey to access a menu of choices that enables you to select an amplitude
modulation waveform that can be produced by the internal modulation source.
Preset
Choices
Location
Remarks
114
PSG-A Series
400.0 Hz
0.5 Hz−1.0 MHz (minimum increment allowed is 0.5 Hz)
Page 231
None
PSG-A Series
Lin
Lin or Exp
Page 230
None
PSG-A Series
Sine
Sine
Noise
Dual-Sine
Ramp
Page 230
The waveform selection applies only to whichever AM path
configuration you have currently selected. Dual-Sine and
Swept-Sine are available for Internal 1 source only.
Triangle
Square
Swept-Sine
Chapter 5