Trans/Recv Pace None Xon; Triangle - Agilent Technologies E8241A User Manual

Key Reference
T
T

Trans/Recv Pace None Xon

Supported
This softkey enables you to determine whether any pacing is acknowledged by the
RS-232 transmit channel. If Xon pacing is used, the system will suspend transmitting
data upon receiving an Xoff character until an Xon character is received. The signal
generator may not be responsive to other channels, or to the front panel, while
transmission is suspended. Xon pacing is not recommended if binary data will be sent to
the signal generator via RS-232 as errors may occur. Toggle
None to turn off Xon pacing.
Preset
Choices
Location
Remarks

Triangle

Supported
This softkey enables you to specify a triangle wave as the modulation waveform for the
internally generated, ac-coupled signal.
Preset
Range
Location
Remarks
220
All
N/A
None or Xon
Page 247
The pace state is not affected by a preset or by a power cycle.
PSG-A Series
N/A
N/A
Page 230, Page 235,
The selected waveform applies only to the path configuration you have
currently selected.
Page 237, Page 240
Trans/Recv Pace None Xon
Chapter 5
to