Manual Mode Off On; Manual Point - Agilent Technologies E8241A User Manual

Key Reference
M
M

Manual Mode Off On

Supported
This softkey toggles the operating state of the manual mode selection for the current
sweep point. When Manual Mode is on, the selected sweep point controls the frequency
and amplitude according to the sweep type.
Preset
Choices
Location
Remarks

Manual Point

Supported
This softkey enables you to choose a point in the sweep list. When Manual Mode is on,
the selected point controls the output parameters (frequency and/or amplitude)
according to the sweep type.
Preset
Range
Location
Remarks
182
All
Off
Off or On
Page 245
This key is disabled when
All
1
N/A
Page 245
This key is disabled when
If list or step mode is controlling frequency and/or power, then the
indexed point in the respective list(s) will be used.
If the point selected is beyond the length of the longest enabled list,
then the point will be set to the maximum possible point, and an error
will be generated.
is set to Off.
Sweep Off On
is set to Off.
Manual Mode Off On
Chapter 5