Am Start Rate; Am Stop Rate; Am Sweep Rate - Agilent Technologies E8241A User Manual

Key Reference
A

AM Start Rate

Supported
This softkey enables you to change the starting frequency of the internally generated
modulation source for swept-sine amplitude modulation.
Preset
Range
Location
Remarks

AM Stop Rate

Supported
This softkey enables you to change the ending frequency of the internally generated
modulation source for swept-sine amplitude modulation.
Preset
Range
Location
Remarks

AM Sweep Rate

Supported
This softkey enables you to set the sweep rate for swept-sine amplitude modulation.
Preset
Range
Location
Remarks
112
PSG-A Series
400.0 Hz
1.0 Hz−1.0 MHz (minimum increment allowed is 1.0 Hz)
Page 231
This softkey is coupled to the
and the
AM Tone 1 Rate
set for AM Start Rate is reflected in the
softkeys.
PSG-A Series
400.0 Hz
1.0 Hz−1.0 MHz (minimum increment allowed is 0.1 Hz)
Page 231
This softkey is coupled to the
Dual-Sine menu. Any value set for AM Stop Rate is reflected in the
softkey.
Tone 2 Rate
PSG-A Series
400.0 Hz
0.1 Hz−100.0 kHz
Page 231
N/A
softkey in the initial AM menu
AM Rate
softkey in the AM Dual-Sine menu. Any value
AM Rate
AM Tone 2 Rate
and
AM Tone 1 Rate
softkey in the AM
Chapter 5
AM