RS-232 Baud Rate
Supported
Use this softkey to access a menu of choices that enables you to set the baud rate in bits
per second for the rear panel RS-232 connector, labeled AUXILIARY INTERFACE.
Preset
Choices
Location
Remarks
RS-232 Echo Off On
Supported
This softkey toggles the operating state of the RS-232 serial port, AUXILIARY
INTERFACE connector, echo function. When this function is set to on, every character
sent to the signal generator is immediately sent back. No editing capability is available.
Preset
Range
Location
Remarks
RS-232 Setup
Supported
Use this softkey to access a menu of choices that enables you to configure the rear panel
RS-232, AUXILIARY INTERFACE, connector.
Preset
Range
Location
Remarks
Chapter 5
All
N/A
57600
38400
4800
2400
Page 247
Once set, the baud rate is not affected by a preset or by a power cycle.
All
N/A
Off or On
Page 248
The echo state is not affected by a preset or by a power cycle.
All
N/A
N/A
Page 248
None
19200
9600
1200
300
Key Reference
R
203