Ref Osc Fine; Ref Oscillator Source Auto Off On; Reference Oscillator Adjustment - Agilent Technologies E8241A User Manual

Key Reference
R

Ref Osc Fine

Supported
This softkey is provided for adjusting the internal reference oscillator. Refer to the
calibration guide for more information.
Preset
Range
Location
Remarks

Ref Oscillator Source Auto Off On

Supported
This softkey toggles the operating state for the automatic source selecting function.
When this function is turned on, the signal generator detects when a valid reference
signal is present at the 10 MHz IN connector and automatically switches from internal
to external reference operation. When this function is turned off, the signal generator
uses the internal reference only, even if an external reference is connected.
Preset
Choices
Location
Remarks

Reference Oscillator Adjustment

Supported
Use this softkey to access a menu of keys that are provided for adjusting the internal
reference oscillator.
Preset
Range
Location
Remarks
200
All
N/A
N/A
Page 248
This adjustment is intended for use by service personnel.
All
On
Off or On
Page 239
None
All
N/A
N/A
Page 248
This adjustment is intended for use by service personnel. Refer to the
calibration guide for more information.
Chapter 5