Rename File
Supported
This softkey enables you to rename the highlighted file in the displayed catalog of files.
When you have entered the new file name, press the
have changed your mind, press the
stored and displayed immediately in the catalog list.
Preset
Range
Location
Remarks
Re-SAVE Seq[n] Reg [n]
Supported
This softkey enables you to save the current instrument state to the selected register
and sequence. If data has already been stored to this location, it will be overwritten. The
signal generator state includes all parameter selections except list sweep data and
selections which are kept as states that are not affected by a preset or a power cycle.
Preset
Range
Location
Remarks
Reset RS-232
Supported
Use this softkey to perform a clean-up on the RS-232 buffer. This clean-up discards any
unprocessed SCPI input received over RS-232 and places the RS-232 connection in a
mode which can detect the optional remote interface.
Preset
Range
Location
Remarks
Chapter 5
All
Return
N/A
N/A
Page 249
None
All
N/A
N/A
Page 244
None
All
N/A
N/A
Page 247
All other RS-232 communication parameters are unaffected.
terminator softkey. If you
Enter
hardkey. Once you press
Key Reference
R
, the new file is
Enter
201