Power Search
Supported
Use this softkey to access the
internal calibration routine that improves output power accuracy when the ALC is off.
Preset
Range
Location
Remarks
Power Search Manual Auto
Supported
This softkey toggles the power search mode between auto and manual. Power search is
an internal calibration routine that improves output power accuracy when the ALC is
off. When you set Power Search to Auto, power search will execute automatically with
each change to the RF frequency or power. When you set Power Search to Manual, the
power search routine is executed when the
Preset
Choices
Location
Remarks
Preset
Supported
This hardkey enables you to set the signal generator to a known state which can be
either the factory-defined state or a user-defined state. Refer to
page
194.
Preset
Range
Remarks
Chapter 5
All
Power Search Manual Auto
N/A
N/A
Page 232
The
softkey must be set to Off in order to
ALC Off On
engage power search mode.
All
Manual
Manual
Auto
Page 232
The
softkey must be set to Off in order to
ALC Off On
engage either power search mode.
All
N/A
N/A
None
softkey. Power search is an
softkey is pressed.
Do Power Search
Key Reference
"Preset Normal User" on
P
193