Table of Contents
Advertisement
Configuring AM
Using this procedure, you will learn how to create a multipath amplitude-modulated RF
carrier with the following characteristics:
• RF output frequency set to 15 GHz
• RF output amplitude set to 0 dBm
• AM Path 1 depth set to 90%
• AM Path 1 rate set to 10 kHz
• AM Path 1 waveform set to sine
• AM Path 2 depth set to 40%
• AM Path 2 waveform set to triangle
Setting the RF Output Frequency
1. Press
.
Preset
2. Press
>
Frequency
The FREQUENCY area of the display now reads 15.000 000 000 00 GHz.
Setting the RF Output Amplitude
Press
>
>
Amplitude
0
The AMPLITUDE area of the display now reads 0.00 dBm.
Setting the AM Depth and Rate
1. Press the
hardkey.
AM
The first level menu of softkeys is displayed.
2. Press
>
AM Depth
90.0 % is displayed below the
3. Press
>
AM Rate
10
10.0000 kHz is displayed below the
Chapter 2
>
.
15
GHz
.
dBm
>
.
90
%
AM Depth
>
.
kHz
AM Rate
Configuring Analog Modulation (PSG-A Series Only)
softkey.
softkey.
Fundamental Operation
35
Hide quick links:
Advertisement
Table of Contents
