Lf Out Tone 1 Freq; Lf Out Tone 2 Ampl % Of Peak - Agilent Technologies E8241A User Manual

LF Out Tone 1 Freq

Supported
This softkey enables you to set the frequency for the LF output tone 1.
This key is coupled to the
LF Out Start Freq
LF Out Tone 1 Freq
Preset
Range
Location
Remarks

LF Out Tone 2 Ampl % Of Peak

Supported
This softkey enables you to set the ratio of the peak amplitude of LF Out tone 2 to the
peak amplitude of LF Out as a percent. The sum of the two LF Out amplitudes results in
the total LF Out amplitude set by the
menu.
For example, if the total LF Out amplitude is 300 mV
LF Out Tone 2 Ampl % Of Peak
200.0 mV and the amplitude of LF Out tone 2 will be 100.0 mV
p
that the amplitude of the two tones equals 300.0 mV
Preset
Range
Location
Remarks
Chapter 5
PSG-A Series
LF Out Freq
softkey in the LF Out Swept-Sine menu. Any value set for
is reflected in the
LF Out Freq
400.0 Hz
0.5 Hz−1.0 MHz (minimum increment allowed is 0.5 Hz)
Page 240
This softkey is active only when you have selected the internal source
to operate as Function Generator 1.
PSG-A Series
to 33%, then the amplitude of LF Out tone 1 will be
50.0%
0.0−100% (minimum increment is 0.1%)
Page 240
This softkey is active only when you have selected the internal source
to operate as Function Generator 1.
softkey in the initial LF Out menu and the
and
LF Out Start Freq
softkey in the initial LF Out
LF Out Amplitude
and you set
p
(200.0 mV
p
Key Reference
softkeys.
(33% of 300.0 mV
p p
plus 100.0 mV ).
p p
L
) so
177