Logon Window - Microhard Systems BulletPlus Operating Manual

4.0 Configuration

4.0.1 Logon Window

Upon successfully accessing the BulletPlus using a Web Browser, the Logon window will appear.
For security, do not allow the
web browser to remember the
User Name or Password.
The factory default User Name is:
The default password is:
Note that the password is case sensitive. It should be changed (discussed further along in this section),
but once changed, if forgotten, may not be recovered.
It is advisable to change the
login Password. Do not
When entered, the password appears as 'dots' as shown in the image below. This display format prohibits
FORGET the new password
as it cannot be recovered.
others from viewing the password.
The 'Remember my password' checkbox may be selected for purposes of convenience, however it is
recommended to ensure it is deselected - particularly once the unit is deployed in the field - for one
primary reason: security.
If the BulletPlus is restored to factory defaults the password is also restored to the original default
password.
As of firmware version v1.3.0-r1014 it is required to change the password upon initial login, once
the password is changed, it will be required to login to the unit once again with the updated
password.
© Microhard Systems Inc.
Image 4-0-2: Logon Window
admin
admin
23