Microhard Systems BulletPlus Operating Manual page 105

4.0 Configuration
The subnet mask for the local network/subnet.
Remote Setup
The remote setup tells the BulletPlus about the remote end, the IP address to create the tunnel to, and the
subnet that is accessible on the remote side of the tunnel.
Enter the WAN IP Address of the BulletPlus or other GRE supported
device in which a tunnel is to be created with at the remote end.
The is the IP Address of the remote network, on the remote side of the
GRE Tunnel.
The is the subnet mask for the remote network/subnet.
IPsec Setup
Refer to the IPsec setup in the VPN Site to Site section of the manual for more information.
© Microhard Systems Inc.
Subnet Mask
Values (IP Address)
(varies)
Gateway IP Address
Values (IP Address)
(varies)
Subnet IP Address
Values (IP Address)
(varies)
Subnet Mask
Values (IP Address)
(varies)
105