Openvpn Client - Microhard Systems BulletPlus Operating Manual

4.0 Configuration

OpenVPN Client

The BulletPlus supports OpenVPN and can be configured as a Server or a Client. This section outlines the
configuration of a OpenVPN Client.
Enable/Disable the OpenVPN Mode by selecting the mode to operate in,
Client or Server. When the Server is enabled it will be listening for incoming
connection requests from OpenVPN Clients.
Select the box to enable Client Bridge Mode.
When Client Bridge Mode is selected the option to enable Pseudowire
Mode is made available.
Select the Tunnel Protocol to be used. The options are TCP and UDP, the
default is UDP.
© Microhard Systems Inc.
Image 4-6-4: VPN > OpenVPN Celint
OpenVPN Mode
Values (selection)
Client / Server / Disable
Client Bridge Mode
Values (selection)
(unchecked)
Pseudowire Mode
Values (selection)
(unchecked)
Tunnel Protocol
Values (selection)
TCP / UDP
101