Backup & Restore Configurations - Microhard Systems BulletPlus Operating Manual

4.0 Configuration
Backup & Restore Configuration
The configuration of the BulletPlus can be backed up to a file at any time using the Backup Configuration
feature. The file can the be restored using the Restore Configuration feature. It is always a good idea to
backup any configurations in case of unit replacement. The configuration files cannot be edited offline, they
are used strictly to backup and restore units.
Use this field to name the configuration file. The .config extension will automatically be added to the
configuration file.
Use the 'Browse' button to find the backup file that needs to be restored to the unit. Use the 'Check
Restore File' button to verify that the file is valid, and then the option to restore the configuration is
displayed, as seen above.
The Keep Carrier Settings box can be selected before the restore process is started, if it is selected the
BulletPlus will retain the current carrier settings and not overwrite them with the settings contained in the
backup file.
© Microhard Systems Inc.
Image 4-1-8: Maintenance > Reset to Default / Backup & Restore Configuration
Name this Configuration / Backup Configuration
Restore Configuration file / Check Restore File / Restore
32