Microhard Systems BulletPlus Operating Manual page 197

5.0 AT Command Line Interface
Description
Get/Set Serial port SMTP client configuration when
IP Protocol mode is set to SMTP client.
Description
Get/Set Serial port PPP configuration when IP protocol mode to set to PPP.
Command Syntax (Effect: AT&W)
AT+MCPPP2=<Mode>,<LCP Echo Failure Number>,<LCP Echo Int
erval>,<Local IP>,<Host IP>,<Idle Timeout>[,<Expected String>,<Response String>]
COM2:
Mode
LCP Echo Failure Number : [0 .. 65535]
LCP Echo Interval
Local IP
Host IP
Idle Timeout
Expected String
Response String
Example
Input:
AT+MCPPP2?
Response:
+MCPPP2:
Mode
LCP Echo Failure Number : 0
LCP Echo Interval
Local IP
Host IP
Idle Timeout(s)
Expected String
Response String
OK
© Microhard Systems Inc.
: 0 - Active; 1 - Passive
: [0 .. 65535]
: Valid IP address
: Valid IP address
: [0 .. 65535] in seconds
: (Optional) 0 - 63 characters
: (Optional) 0 - 63 characters
: 1 - Passive
: 0
: 192.168.12.1
: 192.168.12.99
: 30
: CLIENT
: CLIENTSERVER
Command Syntax (Effect: AT&W)
AT+MCSMTP2=<Mail Subject>,<Mail
Server>,<Username>,<Pas
sword>,<Mail Recipient>,<Message Max
Size>,<TimeOut>,<Transfer Mode>
Mail Subject : 1 to 63 bytes
Mail Server : Valid IP Address or Name
Username : 1 to 63 bytes
Password : 1 to 63 bytes
Mail Recipient : 1 to 63 bytes
Message Max Size : [1 .. 65535]
TimeOut : [0 .. 65535] in seconds
Transfer Mode : 0: Text; 1: Attached File; 2: Hex
Code
AT+MCSMTP2
AT+MCPPP2
197