5.0 AT Command Line Interface
Description
Get network status.
Command Syntax (Effect: Immediate)
AT+MNSTATUS?
Example
Input:
AT+MNSTATUS<enter>
Response:
LAN Port Status
WAN Port Status
4G Port Status
Default Gateway
DNS Server(s)
Kernel IP routing table
Destination
0.0.0.0
169.254.0.0
184.0.0.1
192.168.168.0 0.0.0.0
© Microhard Systems Inc.
General Status
IP Address
: 192.168.168.1
Connection Type : static
Subnet Mask
: 255.255.255.0
MAC Address
: 00:0F:92:02:A8:E4
Traffic Status
Receive bytes : 1.884MB
Receive packets : 18542
Transmit bytes : 2.694MB
Transmit packets : 14377
General Status
IP Address
: N/A
Connection Type : dhcp
Subnet Mask
: N/A
MAC Address
: 00:0F:92:03:A8:E4
Traffic Status
Receive bytes : 0B
Receive packets : 0
Transmit bytes : 684B
Transmit packets : 2
General Status
IP Address
: 184.151.220.2
Connection Type : static
Subnet Mask
: 255.255.255.255
MAC Address
: 00:0F:92:FE:00:01
Traffic Status
Receive bytes : 1.096MB
Receive packets : 8602
Transmit bytes : 10.021MB
Transmit packets : 9461
: 184.0.0.1
: 70.28.245.227 184.151.118.254
Gateway
Subnet Mask
184.0.0.1
0.0.0.0
0.0.0.0
255.255.0.0
0.0.0.0
255.255.255.255 UH 0
255.255.255.0 U
Flags Metric Ref Use Iface
UG 0
0
0 br-wan2
U
0
0
0 br-lan
0
0 br-wan2
0
0
0 br-lan
AT+MNPORT
179
Need help?
Do you have a question about the BulletPlus and is the answer not in the manual?
Questions and answers