Settings - Microhard Systems BulletPlus Operating Manual

4.0 Configuration
4.3.2 Carrier > Settings
The parameters within the Carrier Configuration menu must be input properly; they are the most basic
requirement required by your cellular provider for network connectivity. The BulletPlus can support dual
SIM cards, as described below either slot can be specified as the primary slot and if a connectivity issue
occurs, the unit can be configured to automatically switch to the alternate SIM card.
Carrier Status is used to Enable or Disable the connection to the
Cellular Carrier. By default this option is enabled.
Allows a user to specify the MTU size for custom applications. In most
cases this will be left blank and the system will determine the best
value.
© Microhard Systems Inc.
Image 4-3-2: Carrier > Settings
Carrier Status
Values (Selection)
Enable / Disable
MTU Size
Values
(blank)
57