Microhard Systems BulletPlus Operating Manual page 88

4.0 Configuration
Match incoming traffic from the specified source IP range. Boxes accept
single IP Addresses without network masks, example: 192.168.1.0 to
192.168.1.255 represents all IP Addresses in the 192.168.1.0/24 network.
(Put same IP in both boxes for a single IP match.)
Select the zone which is the intended destination of the data traffic. 3G/4G
applies to the wireless connection to the cellular carrier and the LAN,
LAN1, USB refers to local connections on the BulletPlus.
Match incoming traffic from the specified destination IP range. Boxes
accept single IP Addresses without network masks, example: 192.168.1.0
to 192.168.1.255 represents all IP Addresses in the 192.168.1.0/24
network. (Put same IP in both boxes for a single IP match.)
Match incoming traffic directed at the given destination port or port range.
(To specify a port range use a From:To (100:200) format)
The protocol field defines the transport protocol type controlled by the rule.
© Microhard Systems Inc.
Source IPs
Values (IP Address)
192.168.0.0 to
192.168.0.0
Destination
Values (selection)
LAN/LAN1/Cell/WAN/USB
None
Destination IPs
Values (IP Address)
192.168.0.0 to
192.168.0.0
Destination Port
Values (port)
0
Protocol
Values
TCP
UDP
Both
ICMP
88