Settings; Host Name; Console Timeout - Microhard Systems BulletPlus Operating Manual

4.0 Configuration
4.1.2 System > Settings
System Settings
Options available in the System Settings menu allow for the configuration of the Host Name, Description,
Console Timeout and System Log server settings.
The Host Name is a convenient identifier for a specific BulletPlus unit.
This feature is most used when accessing units remotely: a convenient
cross-reference for the unit's WAN/Carrier IP address. This name
appears when logged into a telnet session, or when the unit is
reporting into Microhard NMS System.
The description provides an additional field for text characters, but is
not displayed anywhere but in this field.
This value determines when a console connection (made via Console
Port or Telnet) will timeout after becoming inactive.
Enabled by default, when the CFG button on the front of the BulletPlus
is held down for 10s while the unit is powered up, the unit will reset
and all settings will be reset to factory defaults. When disabled the unit
will reset, but the settings will not be overwritten.
© Microhard Systems Inc.
Image 4-1-2: System Settings > System Settings
Host Name/Description
Values (characters)
BulletPlus (varies)
up to 30 characters
Console Timeout (s)
Values (seconds)
60
0-65535
CFG Reset to Default Button
Values (Selection)
Enable
Disable
25