Microhard Systems BulletPlus Operating Manual page 52

4.0 Configuration
Default setting can be used for MAC addresses where all addresses
may be allowed (Allow) with a few exceptions, or where all addresses
are block (Deny), with a few exceptions.
After a Default rule has been applied, exceptions can be added by
adding MAC Webfilter Rules.
Add MAC Webfilter rules to apply filtering. If a default rule has been
added these rules can be used to specify exceptions. MAC Webfilter
Rules can also be applied to limit access to just one or a few websites
by simply adding the to the MAC Webfilter list without using a default
rule.
Name: Add a name for the MAC Webfilter Rule.
MAC Address: Enter the MAC Address to apply rule to.
Domain/URL/IP: Enter the Domain Name or URL of the website control access for, i.e.
www.company.com. To ensure the full domain is blocked, enter the most inclusive domain, i.e.
.company.com will block www.company.com and images.company.com and videos.company.com.
Alternatively you can use an IP address or address range written in CIDR notation, i.e. 8.8.8.0/24.
Action: Specify if the rule Allows access or Denies access to the specified address.
Rule Priority: The Rule Priority is used to determine the order rules are evaluated. Higher priority rules
(bigger number) are evaluated first and the first one to match has its assigned action taken."
Enabled: Enable or Disable the MAC Webfilter rule.
When a network is set to Allow (Blacklist) it will allow access to all sites
not blocked in the Filter Rules. Selecting Deny (Whitelist) will only
allow access to websites with an Allow action in the Filter rules, all
other sites will be blocked.
Add Network Webfilter Rules to allow or deny access to specified
content. The Network rules work with the Network Webfilter Default
Settings.
Name: Add a name for the MAC Webfilter Rule.
Network: Select the local network for which the rule applies.
Domain/URL/IP: See description in MAC Filtering Rules above.
Action: See description in MAC Filtering Rules above.
Rule Priority: See description in MAC Filtering Rules above.
Enabled: Enable or Disable the Network Webfilter rule.
© Microhard Systems Inc.
MAC Address Webfilter Default Setting
Values
00:00:00:00:00:00 Allow
MAC Webfilter Rules
Values
Mac1
00:00:00:00:00:00
Company.com
Deny
50
Enabled
MAC Address Webfilter Default Setting
Values (selection)
Allow / Deny
MAC Webfilter Rules
Values
net1
LAN
Company.com
Deny
50
Enabled
52