Mac-Ip List - Microhard Systems BulletPlus Operating Manual

4.0 Configuration
4.5.4 Firewall > MAC-IP List
MAC List configuration can be used to control which physical LAN devices can access the ports on the
BulletPlus, by restricting or allowing connections based on the MAC address. IP List configuration can be
used to define who or what can access the BulletPlus, by restricting or allowing connections based on the
IP Address/Subnet.
MAC-IP List can be used alone or in combination with LAN to WAN/4G Access Control to provide secure
access to the physical ports of the BulletPlus.
Firewall MAC List Configuration
The Rule Name field is required to give the rule a convenient name for
reference. Each rule must have a unique name, up to 10 characters in
length.
Specify the MAC Address to be added to the list. Must be entered in the
correct format as seen above. Not case sensitive.
© Microhard Systems Inc.
Image 4-5-5: Firewall > MAC-IP List
Rule Name
Values (10 chars)
MAC_List
MAC Address
Values ( )
MAC Address
00:00:00:00:00:00
85