Microhard Systems BulletPlus Operating Manual page 147

4.0 Configuration
Set the TCP Window size for the Iperf Cleint/Server. The recommended
default is 85.3K, which can be set by entering 0.
Set the TCP Max Segment Size for the Iperf Cleint/Server. Set to 0 for
recommended settings.
When in Client mode, select the Iperf Server by entering its IP Address
here.
When in Client mode, select the duration of the test (in seconds). The
default is 5.
Select the format to display the bandwidth numbers in. Supported formats
are:
© Microhard Systems Inc.
'Kbits' = Kbits/sec 'Kbytes' = KBytes/sec
'Mbits' = Mbits/sec 'M'bytes = MBytes/sec
TCP Window Size
Values (kbytes)
0
TCP Maximum Segment Size
Values (string)
0
Remote Server Address
Values (IP Address)
192.168.168.100
Values (seconds)
5
Report Format
Values (selection)
Kbits
Mbits
Kbytes
Mbytes
Duration
147