Microhard Systems BulletPlus Operating Manual page 144

4.0 Configuration
Enter in the time at which data is to be refreshed. The default is 10
seconds, the valid range is 2 to 65535 seconds.
For added security a password can be required to connect to the web
socket service. To disable, leave this field blank. The default is disabled.
This field determines how long the web socket is open once started/
enabled. The default is 60 mins, a value of zero means the service with
continue to run indefinitely.
If enabled the modem will report GPS coordinate data to the websocket.
If enabled the modem will report GPS NMEA data to the websocket.
If enabled the modem will report carrier information to the websocket.
If enabled, and the RS232 port is configured for TCP Server, the comport
data will be reported to the web socket.
© Microhard Systems Inc.
Data Fresh Intervals
Values (seconds)
10
Connect Password
Values
(blank)
Max Keep Time
Values (minutes)
60
GPS Coordinate
Values (selection)
Disable / Enable
GPS NMEA Data
Values (selection)
Disable / Enable
Carrier Information
Values (selection)
Disable / Enable
Comport Data
Values (selection)
Disable / Enable
144