Microhard Systems BulletPlus Operating Manual page 45

4.0 Configuration
In some cases there may be multiple routes to reach a destination.
The Metric can be set to give certain routes priority, the lower the
metric is, the better the route. The more hops it takes to get to a
destination, the higher the metric.
Define the exit interface. Is the destination a device on the LAN, LAN1
(If physical WAN port is bridged as an independent LAN), 3G/4G
(cellular), USB or the WAN?
© Microhard Systems Inc.
Metric
Values (Integer)
255.255.255.0
Interface
Values (Selection)
LAN / LAN1 / WAN / Cell / USB
None
45