Logon Window - Microhard Systems Nano IP Series Operating Manual

6.0 Configuration

6.1.1 Logon Window

Upon successfully accessing the Nano IP using a Web Browser, the Logon window will appear.
For security, do not
allow the web browser
to remember the User
Name or Password.
The factory default User Name is:
The default password is:
Note that the password is case sensitive. It may be changed (discussed further along in this
section), but once changed, if forgotten, may not be recovered.
When entered, the password appears as 'dots' as shown in the image below. This display
format prohibits others from viewing the password.
The ‗Remember my password' checkbox may be selected for purposes of convenience,
however it is recommended to ensure it is deselected - particularly once the unit is deployed in
the field - for one primary reason: security.
It is advisable to
change the login
Password (see Section
6.1.6.1). Do not
FORGET the new
password as it cannot
be recovered.
© Microhard Systems Inc.
Image 6A: Logon Window
admin
admin
Image 6B: Logon Window With Password Input
CONFIDENTIAL 44