Microhard Systems BulletPlus Operating Manual page 207

5.0 AT Command Line Interface
Description
Get/Set radio Fragment Threshold.
Example
Input:
AT+MWFRAGTHRESH=0 <enter>
Response:
OK
Description
Get/Set radio CCA Threshold.
Example
Input:
AT+MWCCATHRESH=28 <enter>
Response:
OK
Description
List/Add/Delete radio virtual interface.
Example
Input:
AT+MWIFACE=0 <enter>
Response:
Radio Virtual Interface [0]:
OK
© Microhard Systems Inc.
Network : lan
Mode : ap
TX bitrate : auto
ESSID Broadcast : Off
AP Isolation : Off
SSID : PWii
Encryption Type : psk2
WPA PSK : 1234567890
AT+MWFRAGTHRESH
Command Syntax (Effect: AT&W)
AT+MWFRAGTHRESH=<Fragmentation
Threshold>
Fragmentation Threshold:
0 Disabled
256-2346 Enabled with the value
AT+MWCCATHRESH
Command Syntax (Effect: AT&W)
AT+MWCCATHRESH=<CCA Threshold>
CCA Threshold:
Range of values: 4-127
Command Syntax (Effect: AT&W)
List one or all radio virtual interface(s) :
AT+MWIFACE=0[,<Index>]
Add one radio virtual interface
AT+MWIFACE=1
Delete one radio virtual interface
AT+MWIFACE=2,<Index>
Index:
Radio Virtual Interface Index: 0-3
AT+MWIFACE
:
:
207