Settings - Microhard Systems BulletPlus Operating Manual

4.0 Configuration
4.10.2 GPS > Settings
The BulletPlus can be polled for GPS data via GPSD standards and/or provide customizable reporting to
up to 4 different hosts using UDP or Email Reporting. GPS is an optional feature of the BulletPlus, and
must be specified at the time of order and factory prepared. If the screen below are not available on your
unit, you do not have a GPS enabled model.
Enable or disable the GPS polling function of the BulletPlus.
The BulletPlus contains an standalone GPS module built into the unit. To
use the GPS features of the BulletPlus an antenna must be connected to
the GPS Antenna Port.
Specify the TCP port on the BulletPlus where the GPS service is running
and remote systems can connect and poll for GPSD data.
When enabled the BulletPlus will use the internet to download a file at
bootup with information about its location to assist in quickly connecting to
GPS satellites. This service does consume a small amount of data.
© Microhard Systems Inc.
Image 4-10-2: GPS > Settings
GPS Status
Values
Disable / Enable
GPS Source
Values
Standalone GPS
Cellular Module GPS
TCP Port
Values
2947
GPS Online Assistance
Values
Enable
121