Microhard Systems BulletPlus Operating Manual page 102

4.0 Configuration
The maximum resulting UDP send packet size after the OpenVPN has
fully encapsulated data. Packets exceeding this max value will be
fragmented.
The IP Address and TCP/UDP port which the server is located. This is
generally the Public IP Address of the router/modem where the Server is
running.
The root certificate file (CA file) that all the server and clients must have in
common.
The Client Certificate which is the certificate file that resides on only the
client.
The private Client Key, which should not be disclosed.
The server and each client must have a copy of this key to do TLS
authentication.
Select a cryptographic cipher. Must be the same on Server and
Client.
Enable/Disable LZO compression on the VPN link. Lempel–Ziv–
Oberhumer (LZO) is a lossless data compression algorithm.
© Microhard Systems Inc.
MSSFIX/Fragment size
Values (size)
1370
Server IP/Port
Values (IP/Port)
(no default)
Root Certificate
Values (chars)
ca.crt
Cleint Certificate
Values (chars)
client.crt
Client Key
Values (chars)
client.key
TLS Auth Key
Values (chars)
(no default)
Cipher
Values (selection)
DES-CBC RC2-40-CBC
RC2-CBC CAST5-CBC
DES-EDE-CBC RC2-64-CBC
DES-EDE3-CBC AES-128-CBC
DESX-CBC AES-192-CBC
BF-CBC AES-256-CBC
SEED-CBC
Use LZO Compression
Values (selection)
Enable / Disable
102