Microhard Systems BulletPlus Operating Manual page 66

4.0 Configuration
Select the notification method used to send alerts when daily or monthly
thresholds are exceeded. If none is selected, notifications will not be sent,
but data usage will be recorded for reference purposes.
Select the data unit to be used for data usage monitoring.
Select the data limit for the day or month, used in connection with the data
unit is the previous field. If you want to set the limit to 250 Mbytes, select M
Bytes for the data unit, and 250 for the data limit.
For Monthly tracking, select the day the billing/data cycles begins. On this
day each month the BulletPlus will reset the data usage monitor numbers.
Up to two (2) additional notices can be sent based on a percentage (10-
500%) of the threshold value.
If SMS is selected as the notification method, enter the phone number to
send any SMS messages generated when the data usage exceeds the
configured limits.
© Microhard Systems Inc.
Image 4-3-9: Data Usage > SMS Config
Monthly/Daily Over Limit
Values (selection)
None
Send Notice SMS
Send Notice Email
Both SMS & Email
Monthly/Daily Data Unit
Values (selection)
Bytes / K Bytes / M Bytes
G Bytes
Data Limit
Values (1-65535)
500
Period Start Day
Values (1-31)
1 (Day of Month)
Additional Notice 1/2
Values (10-500%)
(none)
Phone Number
Values (phone)
+1403
66