Microhard Systems BulletPlus Operating Manual page 125

4.0 Configuration
A phone number filter can be applied to prevent SMS commands not
intended for the BulletPlus from being processed.
Use this parameter to enable or disable the motion trigger in the BulletPlus.
When enabled, the BulletPlus will send the current status of the Digital I/O
inputs and/or outputs to the GpsGate Server.
Specify what happens when the GPS data is invalid, either use the last
valid position or do not use the last valid position.
GpsGate - TCP Mode
© Microhard Systems Inc.
When GPS Invalid, Sending Data
Image 4-10-5: GPS > GpsGate TCP Mode
Setup Phone Filter
Values (selection)
Disable: Accept All
Enable Filter
Motion Trigger
Values (selection)
Disable
Enable Motion Trigger
Send IO Status
Values (selection)
Disable
Send Input Status
Send Output Status
Send Input&Output Status
Values (selection)
Not Use Last Valid Position
Use Last Valid Position
125