Microhard Systems BulletPlus Operating Manual page 192

5.0 AT Command Line Interface
Description
GET IO status.
Example
Input:
AT+MIOSTATUS <enter>
Response:
+MIOSTATUS: IO status
iodigiinval1=High
iodigiinval2=High
OK
Description
GET IO meter (V).
Example
Input:
AT+MIOMETER <enter>
Response:
+MIOMETER: IO meter(V)
iovolts1=2.77
iovolts2=2.81
OK
Description
Configure the Serial port as either a console port
(AT Commands) or a Data Port.
Example
Input:
AT+MCPS2=0<enter>
Response:
OK
© Microhard Systems Inc.
AT+MIOSTATUS
Command Syntax
AT+MIOSTATUS <enter>
Command Syntax
AT+MIOMETER <enter>
Command Syntax (Effect: AT&W)
AT+MCPS2=<Mode>
Mode:
0 Console
1 Data
AT+MIOMETER
AT+MCPS2
192