(3)
Enter the password, and then press the [OK] button.
(If the password is not set for Service, press the [ENTER] button without entering anything.)
(4)
Set the destination of FAX (08-9001).
(5)
Turn the power OFF.
(6)
Start up with the FAX Clearing Mode (1*).
(7)
Perform the FAX Set Up (1*-100).
(8)
Turn the power OFF and then back ON.
(9)
Set the dial type according to these buttons: [USER FUNCTIONS] -> [ADMIN] -> [FAX] ->
[INITIAL SETUP]
[O] Set date and time
Set the date and time according to these buttons.
[USER FUNCTIONS] [ADMIN] [GENERAL] [CLOCK] [DATE/TIME]
e-STUDIO477S/527S/477SL
REPLACEMENT OF PC BOARDS/HDD
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
6 - 28