Invalid Tsig/Sig(0) Key File; Wireless Association With Access Point Failure; Wireless Certificate Verification Failure - Toshiba e-STUDIO477S Service Manual

[8069] Invalid TSIG/SIG(0) Key file

Classification
Network error
Check item
Setting

[8101] Wireless association with Access point failure

Classification
Network error
Check item
Setting
[8102] MFP not able to contact the Access point with the specified SSID
Classification
Network error
Check item
Setting

[8103] Wireless Certificate verification failure

Classification
Network error
Check item
Setting
[8121] Domain - General Failure during Authentication
Classification
Network error
Check item
Setting
e-STUDIO477S/527S/477SL
ERROR CODE AND TROUBLESHOOTING
This message is displayed when the key file for SIG(0) or
TSIG is invalid.
Verify the TSIG/SIG(0) key files used.
Wireless association with Access point failure
Verify the credentials used for association with Access point.
MFP not able to contact the Access point with the specified
SSID
Verify the access point name setting and mechanism used for
association same as Access Point setting.
Wireless Certificate verification failure
Verify the certificate settings used for association.
An unknown domain authentication error occurs when
connecting to the domain controller.
Check the network settings of the equipment, and retry
connecting to the domain controller.
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
5 - 106
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures